Ultrasonic cleaner system

Industrial Ultrasonic Parts Cleaning Applications

Ultrasonic Cleaning & Rinsing Systems

System Design Features:

• Ultrasonic Cleaning, Rinsing, and Compressed Air Drying in a Single Cleaning System.
• All Components are Easily Accessed for Maintenance Operations.
• Available with Pulse Sweep Energy Ultrasonic Systems.
• SS Control Enclosure Provides Ease of Operation while Eliminating Potential Corrosion.
• Stainless Steel Construction with powder coated
• Variable Power 10 % – 100%
• Inbuilt Digital Timer & Digital Temp. Controller.
• Auto Degassing

Advantages

• Labor cost is substantially reduced.
• Increase the Parts life.
• Reduced Parts damage from cleaning.
• Reduced wastages.
• Environmentally friendly.
• Easy to maintain system.
• MOSFET / IGBT Base technology save the power.
• Heater with Digital Temp. Controller increase cleaning effect.
• Rust free stainless steel housing , easy to clean.
• Free Lid & basket as per customer need.

Power House of Ultrasonic Cleaners

Thorough cleaning of Parts always is always worry in industries. Most of the industries are still cleaning the Parts by hand scrubbing.. Residue on Parts has been removed by rubbing the cleaning solution with the help of brush. The cleaning method is time consuming, waste of manpower, still cleaning is not consistence & not up to the mark.

Optima have developed Ultrasonic Cleaner for successful cleaning of parts. No more hand and mechanical brushing is needed to remove contaminated with grease, hydraulic oil, rust, grime, carbon, aluminum shavings and material gassing , residual polymer on parts.

Using Optima Ultrasonic cleaner you can thoroughly clean the parts. This will reduce your manpower in hours & number of person required for Parts cleaning process. While cleaning Parts in ultrasonic cleaner you will not have to disassemble parts. It will also increase the life of parts.

Optima Table Top Modules are used for small Parts . The Two-tank ultrasonic cleaning and rinsing machine designed for medium volumes of Parts are cleaned and rinsed manually by operators. A compressed-air Drying Wand is also included to permit operators to dry Parts after the rinsing process is complete.

The Optima two tank ultrasonic cleaning & rinsing machine is manufactured using the highest grade of

materials available, and includes features such as stainless steel access panels, and Digital Cycle Timers to increase the longevity of the cleaning agent and system, while simultaneously providing convenient operation. Controls are enclosed in a electrical enclosure of steel enclosure to eliminate the possibility of corrosion. Systems also include drain and fill ports with ball valves to provide for easy liquid maintenance operations.

Ultrasonic cleaning is performed in the first stainless steel tank. Ultrasonic options include a choice of Pulse Sweep Energy ( PSE ) Ultrasonic System for the best possible cleaning effect for most applications. The ultrasonic cleaning tank is heated using a high-efficiency heater with a Digital Temperature Controller which continuously displays bath temperature. The included Digital Ultrasonic Timer automatically deactivates the ultrasonic cleaning cycle when complete.

Under water Rinsing is performed in the 2nd stainless steel tank. Since only 1 rinse tank is included, this system is designed for lower-volume applications where detergent transfer from cleaning tank to the rinsing tank is minimal. An Overflow Port and Fill Port with ball valve control are included on the rinse tank to provide the ability to add water to the rinse tank when water quality is un-acceptable.

If operators utilize the Compressed Air Wand for drying of the parts, water residues will be minimized or eliminated since the water is removed from the Parts completely.