||Design no.1…5 & IT40 Sr.
||6 Sec.(63.2%) for 6mm OD sheath
||Provided in design no.4 & IT40 Sr.
||Smallest bending radius
||Twice the sheath diameter
||Adjustable compression fitting
|Head type Standard
||With threaded cover & cable entry(3/4”ET/ ½”BSP)
||(In design no.4 & IT40 Sr.)
||1/8”BSP(M) upto 6mm OD sheath other sizes on request in design no.4 Flange/ Threaded in IT40 Sr.
|Standard with gasket & challan (IP65)
CMRS approved for group 1,IIA,IIB & II C, weatherproof to IP65
|Extension Cable (in design no.2)
||Compensating Cable with fibre glass/figre glass/SS wire braided insulation for Thermocouple. Copper cable with
Teflon/Teflon/SS wire braided Insul. For RTD other types on request
|Terminal block (in design no.3,4 & IT40)
||Ceramic with brass terminals & with provision for two mounting screws on 33mm PCD; terminal block is spring loaded in design no.3 & IT40
(in design no.5)
|Of glass filled thermoplastic with thermocouple grade contacts & ANSI colour coaded for thermocouple (Design No.5A); Of MS, circular threaded locking type with copper contacts, 3/6 pin for RTD,(Design
||AISI316/304/321/347/310/ 446/inconel600/ Hastalloy X in 1, 1,5,3,4,5,6,8,12,7,15,8 & 19.05mm dia for thermocouples; AISI 316 in 3.2, 4.8, 7 & 8mm dia for RTDs.
||Simplex/duplex: J/K/T/E/N/S/R for thermocouples: Pt100, 2/3 wire for RTD with copper leads (Const./Ni. optional).
(in IT40 Sr.)
|Refer drg. No. TC260(3) for selection of Design. General construction of sensor in this case will be as per drg.no.TC259(3)
using insert as per design no.3 alongwith head & extension using nipple/union.
||10 M Ohms at 500V DC, 100M Ohms on request.